Setting up SSH and Git for Multiple Accounts

Sébastien Lavoie — Sat, 03 Oct 2020 15:25:00 -0500

Introduction

To work effectively with services such as GitHub and GitLab, it is useful to set up a workflow that doesn’t get in the way, especially when multiple accounts are involved. SSH will be set up to avoid entering the username/password combination every time we interact with remote repositories and Git will be set up to work differently for each account while signing the commits potentially with different GPG keys.

In short, we need to do the following:

Set up SSH locally (in ~/.ssh/);
Set up SSH keys remotely (GitLab, GitHub, Bitbucket, etc.);
Set up Git locally (in ~/.gitconfig);
Set up GPG keys remotely (add our keys(s) to GitLab, GitHub, etc.);
Start interacting with remote repositories.

Setting SSH locally

First, let’s make sure we have some SSH keys to work with. The default location is ~/.ssh/id_rsa (you can just press Enter when asked to save to a path):

bash

$ ssh-keygen -t rsa -C "email@personal.com"

The next key should have a different path:

 bash
 
$ ssh-keygen -t rsa -C "email@work.com"
$ Enter file in which to save the key
 (/home/sglavoie/.ssh/id_rsa): /home/sglavoie/.ssh/id_rsa_work

Add the keys to the authentication agent like so:

bash

$ ssh-add /.ssh/id_rsa
$ ssh-add /.ssh/id_rsa_work

See which keys were added:

bash

$ ssh-add -l # list the keys

If you need to delete any keys that were cached prior to that:

bash

$ ssh-add -D

Now, we need a configuration file:

 bash
 
$ touch ~/.ssh/config
$ chmod 600 ~/.ssh/config

Let’s add some content in there, assuming we deal with GitHub and GitLab, both with a personal account and a work account:

 bash
 
 
 
AddKeysToAgent yes
Host github
 HostName github.com
 User git
 IdentityFile ~/.ssh/id_rsa
Host github-work
 HostName github.com
 User git
 IdentityFile ~/.ssh/id_rsa_work
Host gitlab
 HostName gitlab.com
 User git
 IdentityFile ~/.ssh/id_rsa
Host gitlab-work
 HostName gitlab.com
 User git
 IdentityFile ~/.ssh/id_rsa_work

The directive AddKeysToAgent yes is useful to avoid typing ssh-add path_to_key every time SSH is needed.
The Host can have any name we want, it doesn’t need to match the HostName.
The HostName is the address we need to access. This should be the same thing for all accounts using a particular service (here, GitHub or GitLab).
We can set the user to be git by default.
For each Host, we indicate which IdentityFile to use when trying to work with a remote repository.

Automatically load the keys from the Shell

For Zsh, the following can be added near the top of ~/.zshrc when using the ssh-agent plugin:

 bash
 
# Load multiple SSH keys
zstyle :omz:plugins:ssh-agent identities id_rsa id_rsa_work

With Oh-My-Zsh, the ssh-agent plugin should be contained in plugins like so:

 bash
 
plugins=(git ssh-agent fzf gitignore zsh-autosuggestions history-substring-search)

# Somewhere below
source $ZSH/oh-my-zsh.sh

With this setup, the SSH keys will be loaded when opening a terminal after booting up and those will be available for any subsequent terminal sessions until the user session is exited.

Setting SSH keys remotely

The process will be slightly different on each platform on which we want to authenticate, but the gist of it is to paste the content of the public SSH key in the field when asked to do so.

Setting Git locally

The idea is to have a ~/.gitconfig file from which we load the main Git configuration by default (let’s say, our personal account) and then we load another account – overwriting the Git settings of the personal account with the settings defined for that other account – whenever we navigate to a directory that relates to that other account. Let’s see this in action.

Minimal `~/.gitconfig`

 bash
 
 
 
# default configuration settings to load
[include]
 path = ~/.gitconfig-personal

# when working with company-x
# those settings are loaded only when the
# directory matches the pattern defined
[includeIf "gitdir:**/company-x/**/.git"]
 path = ~/.gitconfig-company-x
[gpg]
	program = gpg
[credential]
	helper = store

The [credential] section with the setting helper = store will store your username/password combination when using HTTPS so you don’t have to type it over and over again. You could also set this to helper = cache if you don’t want to permanently store credentials.
The includeIf directive will be triggered whenever you are in a directory containing company-x in this case so that your correct GPG key and Git settings will be used instead of the default settings for your personal account.
In the block [gpg], your system may be using the program gpg2 instead of gpg.

Minimal `~/.gitconfig-personal` and `~/.gitconfig-company-x`

Example for one of those:

 bash
 
 
 
[user]
 email = email@work.com
 name = Sébastien Lavoie
 signingkey = A343702EBE11E0C2
[commit]
 gpgsign = true

If you don’t have a GPG key already, you can generate one with this command:

bash

gpg --gen-key

To list existing GPG keys to determine the signinkey value to use in those files, you can type:

bash

gpg --list-secret-keys --keyid-format LONG

You might get an output similar to the following (this one is showing only one key):

 bash
 
 
 
sec rsa3072/A343702EBE11E0C2 2020-10-03 [SC] [expires: 2022-10-03]
 EF731EFC008D47D176C05910A343702EBE11E0C2
uid [ultimate] Sébastien Lavoie <email@work.com>
ssb rsa3072/718726CCFED43B47 2020-10-03 [E] [expires: 2022-10-03]

The bit you need to retrieve for the signingkey value comes after the type of encryption, here it’s rsa3072 and the bit we want is A343702EBE11E0C2.

If you need to edit a key, there are plenty of options described with man gpg or man gpg2. For instance, to remove the expiration date for the above key:

bash

gpg2 --edit-key EF731EFC008D47D176C05910A343702EBE11E0C2

At the gpg> prompt, type expire and follow the instructions.

To delete a key, you can do so by referring to the email address like this:

bash

gpg --delete-secret-and-public-key email@work.com

Just follow the instructions from there. You may need to repeat the process multiple times if your email address is associated with more than one key.

Setting GPG keys remotely

Just like with the SSH keys, the process differs from one platform to the other.

Interacting with remote repositories

Now that the Git configuration is set up and we have SSH and GPG keys to authenticate ourselves and verify our identity when committing, respectively, we can start interacting with remote repositories. From the example we have been following, the file ~/.gitconfig-personal will be used by default (and by consequence, our personal account).

The SSH part

When first cloning, change the host so that it reflects what you have in ~/.ssh/id_rsa_correct_key_file. For your personal account, no change would be required:

bash

git clone git@github.com:organization/repo.git

For a repository at work requiring the SSH key set up for the work account, you would need to change to the appropriate host like so (we still use the git user for convenience):

bash

git clone git@github-work:organization/repo.git

For a refresher, the following are the hosts we have set in ~/.ssh/config: github, github-work, gitlab, gitlab-work.

The difference will be noticed when pushing/pulling as seen with git remote -v:

 bash
 
$ git remote -v
origin	git@github-work:organization/repo.git (fetch)
origin	git@github-work:organization/repo.git (push)

Whereas the personal account will have the same host as usual, for instance git@github.com:organization/repo.git.

The GPG part

If we want to keep our personal and work Git configurations separate (and we probably want that! ;)), it’s only a matter of ensuring that the includeIf pattern contains, in this example, company-x somewhere in the path. When this is the case, we will see with git config --list in the cloned repository that our personal account details are loaded first, but if the includeIf directive matches, the settings for that other account will be applied on top and used when committing.

If you type git config --list and search for the word “email” in the output, it will appear only once when the default ~/.ssh/id_rsa key is used (or whatever is read for the IdentityFile from the SSH configuration file) while you will see that same personal email showing up first in a work repository, but then later in the output you will find the work email, work GPG key and so on.

Conclusion

This is one possible kind of setup we can use to work with SSH and GPG comfortably. This is pretty much a “set it and forget it” approach as long as you remember the following:

SSH: Change the SSH host when cloning. If the repository is not publicly available, it would fail anyways (or you may realize you can clone it if it’s a public repo but have no push access).
Git: Make sure you are in a directory where the includeIf directive will kick in to set up the email, GPG key and so on.

One nice tip to help with the latter bullet point could be to define an alias, say in ~/.bash_aliases, something like what follows:

 bash
 
cdwork='cd /path/to/work/dir/with/appropriate/pattern'

Then, you simply cdwork and store all your Git repositories for work under that root repository, which would always match the desired pattern by default. That’s it. Anything else related to the personal account can be cloned anywhere on the file system since this is the default configuration file used. For more Git-related content, you might enjoy reading Git the gist of it: common commands for a working workflow.

sglavoie.com – Tag: GPG

Setting up SSH and Git for Multiple Accounts

Introduction

Setting SSH locally

Automatically load the keys from the Shell

Setting SSH keys remotely

Setting Git locally

Minimal ~/.gitconfig

Minimal ~/.gitconfig-personal and ~/.gitconfig-company-x

Setting GPG keys remotely

Interacting with remote repositories

The SSH part

The GPG part

Conclusion

Minimal `~/.gitconfig`

Minimal `~/.gitconfig-personal` and `~/.gitconfig-company-x`