Using dmenu to Optimize Common Tasks

Sébastien Lavoie — Sun, 10 Nov 2019 09:02:00 -0600

Introduction

dmenu is one of those tools that look a little unimpressive at first but can accomplish so much! It’s a program that you can use to receive any output redirected from other programs (through pipes in the terminal, the symbol |) and treat that output so that it can pop up within a simple menu to make it available for execution. If you want to know more about other fantastic tools from suckless.org, I went over some of them before, such as the st terminal and slock, a dead simple screen locker.

Any Simple Example?

You bet! Before diving in with how to install it and some more concrete examples, you could give dmenu a go with a simple command such as the following (assuming the program is installed on your machine).

bash

ls | dmenu

This will effectively “pipe” the output of ls into dmenu and a menu like the following would appear (by default, it shows as a thin stripe at the top covering the width of the screen):

If you start typing, the displayed list will be filtered down like so:

You can also switch to the next item to be highlighted by typing Ctrl + n, to the previous item by typing Ctrl + p and exit by reaching for the Escape key. For now, if you type Enter once your desired selection is highlighted, the selection will be outputted to the terminal and that will be the end of it. Let’s convert this into a practical thing, then.

Keeping the same output as before which only contained directories, we could open a file manager (here, I’m going with pcmanfm) and do something like this (bear with me, the explanation follows!):

 bash
 
ls | dmenu -l 5 | xargs -I {} pcmanfm "{}"

This is now a fully functional example, albeit its practicality is debatable. What will happen, exactly?

First, ls will output a list of directories in the current working directory. That is, the following would be printed in the terminal without any piping:

Desktop Downloads Learning Pictures Public Templates virtualbox_vms
Documents Dropbox Music Programming SortOut Videos

When we pipe this into dmenu, we will get a menu with all that output nicely formatted vertically, which is what the -l 5 options does (here, we want only 5 lines to show). We will see a maximum of 5 items as this is the value we passed to the -l option:

We can still start typing a word that doesn’t show up in this list like Mu and we will see that this list is filtered to only include the matching directory Music even though we couldn’t see it before since we limited our results to 5 items. We could also use the same technique with Ctrl + n and Ctrl + p to cycle between the elements.

Up to this point, we are getting our selection outputted to the terminal. Next, we pipe it into xargs, which will allow us to specify a command to which we will pass our result (what is printed to the terminal) as an argument (we could make use of more arguments depending on the output we get, but let’s start simple). The -I {} option will make it possible to “quote” our result so it is read as a single argument and properly escaped. This means that without this option, if we have spaces or other special characters in the argument (such as a folder called My Music), it would try to pass each word as a new argument to pcmanfm, trying to open both My and Music directories at once.

We are representing our output as {} and when we quote it with pcmanfm "{}", spaces are interpreted without any trouble. If we wanted to use various arguments instead, we could try something like this:

 bash
 
echo "file1.txt file2.txt\nfile3.txt file4.txt" | dmenu -l 2 | xargs cat

The part before the first pipe character will print to the terminal those two lines:

file1.txt file2.txt
file3.txt file4.txt

When we pipe this into dmenu -l 2, we will get this menu:

Typing Enter on one of the highlighted items would then trigger xargs to pass the content literally to cat as arguments, which would then print to the terminal the content of both file1.txt and file2.txt (the first line containing two arguments for cat) or the content of both file3.txt and file4.txt (the second line also containing two arguments for cat) in succession.

Now that we got our feet wet with what dmenu does (displays a menu), we might want to install it.

How do You Install It?

In Manjaro Linux, it comes with i3 if you use that flavor of the distribution and can be opened by pressing the modifier key (either Super/Windows key or Alt key) along with the letter d, as in the shortcut mod + d, or by typing dmenu_run in a terminal, which will present a list of installed applications to launch. Otherwise:

Debian-based (such as Ubuntu)

bash

sudo apt install dmenu

Arch-based (such as Manjaro)

bash

pacman -Syu dmenu

You can also install it from your distribution’s package manager if available or from source.

Useful Real-World Examples

Here are a couple of ways I like to use dmenu to open a menu with a list of:

cheat sheets;
filesystem paths;
most used documents;
documents & books I read at the university;
custom scripts I want to run in the background.

Here are a few screenshots of how it currently looks like in my daily usage so you get a better idea.

Cheat sheets

University shortcuts

File manager shortcuts

So, how does that all work? As a starting point, all of those menus are launched through a specific keyboard shortcut that uses a mnemonic for each one (mod being the “modifier” key on i3, which is set to Super/Windows):

mod + Alt + c: cheat sheets;
mod + Alt + d: documents;
mod + Alt + f: file manager;
mod + Alt + s: scripts;
mod + Alt + u: university.

Let’s take the cheat sheets example, which is a bit more interesting since it launches different applications.

Setting Up a Custom Command

Configuration for i3 (bind a keyboard shortcut)

Here, I’m using i3 to set a keyboard shortcut to run a specific command, but this will be a similar experience on other window managers and desktop environments.

 bash
 
 
 
# i3config file
# The backslash at the end of the line allows us
# to split the line to increase readability

## Cheatsheets

bindsym $mod+Mod1+c exec --no-startup-id \
cat path/to/cheatsheets.conf \
| dmenu -l 30 | sed 's/.* \+//' | sh

You would usually be able to launch a custom command from your environment through a keyboard shortcut. If passing a direct command such as the above one isn’t an option, you can always store it in a Bash script and run that Bash script instead as the designated custom command. The script would then contain the following:

 bash
 
#!/bin/bash

## Cheatsheets
cat path/to/cheatsheets.conf \
| dmenu -l 30 | sed 's/.* \+//' | sh

As far as i3 is concerned, that’s all you need to do. You would need to reload the configuration file (by default: i3config) where the previous bindsym command has been set up to apply the changes (default shortcut to reload: mod + Shift + c).

Configuration for cheatsheets.conf

The content of this file is literally what will be shown when dmenu opens it. An excerpt:

 
#---------- Cheat Sheets -------------------------------------------------------
bash st -e nvim path/to/bash.sh
git zathura path/to/github.pdf
vimwiki firefox path/to/vimwiki.html

Here, we have set a maximum of 30 lines to be displayed (-l 30). What follows after an element has been selected with dmenu allows us to parse the content of the line and retrieve only the command we are interested in with sed before passing that filtered content around to sh to execute it as a shell command. With more complex commands requiring multiples arguments to be received, we could add one more pipe between sed and sh like this (or with xargs -I {} to avoid problems with spaces):

 bash
 
cat path/to/cheatsheets.conf \
| dmenu -l 30 | sed 's/.* \+//' | xargs -r | sh

If the line we want to run only includes a path to a file as in:

myshortcut path/to/file.pdf

We could instead pipe it into an external command of choice if the same program applies to all items presented in the menu, say Firefox:

 bash
 
cat path/to/file.conf \
| dmenu -l 30 | sed 's/.* \+//' | xargs -I {} firefox "{}"

What’s nice with the way pipes work in a Unix-like system is that we can chain harmless commands until the very end so they will simply be printed to the terminal. In this example, if we want to see how to filter our lines before running a command, we can do so as follow.

Pipe 1

 bash
 
cat path/to/cheatsheets.conf \
| dmenu -l 30

If you remember from the menu we saw earlier, there’s a shortcut to open a cheat sheet for Git. Let’s say we selected that one with dmenu. Because our command isn’t doing anything with the result, it will be outputted to the terminal like so (just like in the excerpt of cheatsheets.conf):

bash

git zathura path/to/github.pdf

What sed does here is to cut everything from the beginning of the line up to where the command starts (that’s where we find zathura, which is a powerful document viewer), because we need to isolate that part of the line so it looks like a shell command we could run on its own. Let’s add a new pipe to our command and see what sed does with it*.

* _{We could have used other tools to parse the string like awk, grep, cut, etc.}

Pipe 2

 bash
 
cat path/to/cheatsheets.conf \
| dmenu -l 30 | sed 's/.* \+//'

If we select the same item as before with dmenu to illustrate more clearly what this new addition does, we will get this output:

bash

zathura path/to/github.pdf

If we were to type this in the terminal (assuming the file exists and zathura is installed!), that would do the trick and it would open with the specified document viewer. Pipe 2 and subsequent pipes before we execute something is where the filtering magic happen. In short:

Everything before | dmenu is how our input will look like when we run dmenu;
Everything after | dmenu [options here] | is what we need to do to our input so that it is converted into a working shell command;
Finally, what comes after the last pipe (either xargs, sh or a combination of both) is our way to redirect our string to the shell so it can be executed.

Once we are visually satisfied with how our command is supposed to look like (it has to be something that works when typed directly in the terminal), the next step is to pipe it again so it can be executed.

Pipe 3

 bash
 
cat path/to/cheatsheets.conf \
| dmenu -l 30 | sed 's/.* \+//' | sh

There we go, the command is launched. If we keep the same simple syntax in all of our .conf files —or whatever extension we choose— where the content of our menus is stored in plain text, we can quickly and painlessly create keyboard shortcuts to run custom lists of commands that can be edited on the fly. Once our shortcuts are active, it’s only a matter of editing one of those .conf files and automatically our lists will be up-to-date when we trigger the shortcut again.

Running a Custom Script

If we want to run custom scripts, we need to indicate a command that would work in the terminal, such as python myscrypt.py or ./myscript.sh. When it comes to shell scripts, we have to make sure they are executable. We can do so through a file manager or within the terminal like this:

bash

chmod +x path/to/script.sh

This will add the necessary permissions for the user to execute the script. As we already know, we would then need to add a keyboard shortcut to launch our custom menu and store our command in a file like scripts.conf that would contain the following:

#---------- scripts.conf -------------------------------------------------------
myscript script.sh

And that’s all there is to know to get piping with dmenu! You may also find this video from Luke Smith on YouTube to be quite helpful as well, which is where the inspiration for this post came from. He also posted a complementary video about adding prompts to your commands which is a nice way to add interactivity to your scripts!

Chaining dmenu prompts

Another useful scenario is when you want to take a specific action based on the output of a previous command. For instance, let’s say you want to read a book but when you choose a pdf with dmenu, you want to be prompted for which reader to use while you want to let the system choose the default application for other types of files (e.g. epub or mobi). This could be achieved with a script similar to the following one:

 bash
 
 
 
#!/bin/bash
FILE=`find ~/Documents/calibre_library -type f -iname "*.pdf" -o \
 -iname "*.epub" -o -iname "*.mobi" | dmenu -l 30`

if [[ "$FILE" == *.pdf ]]
then
 READER=`echo -e "zathura\natril" | dmenu -i -p "Which reader?"`
 $READER "$FILE"
else
 xdg-open "$FILE"
fi

Here’s what’s happening:

We find all the files (-type f)
in the directory ~/Documents/calibre_library
that match a pattern that’s case-insensitive with -iname (here, ending in either pdf, mobi or epub)
matching one file at a time (-o can be interpreted to mean “only” and will keep searching if the previous file extension was not matched)
then presenting 30 lines (-l 30) of results at a time with dmenu
then, if the file is a PDF, prompts whether to use atril or zathura as the file reader and open with the chosen program
otherwise, open the file with the default application.

Customize the Look of dmenu

As they say, “beauty is in the eye of the beholder”. If you would rather make some changes to how dmenu look, you can. dmenu will be searching for the configuration file located at ~/.dmenurc, which could contain something as put below (with this configuration, it will look like the screenshots shown previously):

 bash
 
 
 
#
# ~/.dmenurc
#

# define the font for dmenu to be used
DMENU_FN="NotoSans-10.5"

# background colour for unselected menu-items
DMENU_NB="#161925"

# textcolour for unselected menu-items
DMENU_NF="#fdfffc"

# background colour for selected menu-items
DMENU_SB="#235789"

# textcolour for selected menu-items
DMENU_SF="#fdfffc"

# command for the terminal application to be used:
TERMINAL_CMD="st -e"

# export our variables
DMENU_OPTIONS="-fn $DMENU_FN -nb $DMENU_NB -nf $DMENU_NF -sf $DMENU_SF -sb $DMENU_SB"

Conclusion

Hopefully this introduction to what dmenu has to offer gave you some ideas. I hope you’ll find many ways to adapt the examples so you can benefit from this amazing tool. You can find more configuration details in my dotfiles on GitHub for anything related to i3, dmenu, zathura, st, slock and many more useful programs.

Have a good time automating your digital life!

sglavoie.com – Tag: dmenu

Using dmenu to Optimize Common Tasks

Introduction

Any Simple Example?

How do You Install It?

Debian-based (such as Ubuntu)

Arch-based (such as Manjaro)

Useful Real-World Examples

Cheat sheets

University shortcuts

File manager shortcuts

Setting Up a Custom Command

Configuration for i3 (bind a keyboard shortcut)

Configuration for cheatsheets.conf

Pipe 1

Pipe 2

Pipe 3

Running a Custom Script

Chaining dmenu prompts

Customize the Look of dmenu

Conclusion